 |
| Jane’s Double Twisted 3D stars2_rev (Photo credit: mimickr) |
How is the Spousal Benefit calculated? I’ve covered this topic in several prior posts, but thought I’d give it another shot, to hopefully close this chapter for now. I’ve heard conflicting answers from various corners of the SSA world – both personally and from reader communications. Too often there is a pat answer that the Spousal Benefit, if taken at FRA (Full Retirement Age) is always 50% of the other spouse’s PIA (Primary Insurance Amount). This is not always the case, if the individual has begun receiving retirement benefits based on his or her own record before FRA and then later begins receiving the Spousal Benefit.
When an individual begins receiving retirement benefits based upon his or her own record has a lasting effect on the amount of all retirement benefits that this individual will receive, including Spousal Benefits. This is due to the fact that the Spousal Benefit, when the retirement benefit is present, is an offset amount based upon the difference between the maximum Spousal Benefit (50% of the other spouse’s PIA) and the PIA of the first spouse.
The early retirement benefit amount calculation is fairly straightforward (at the link you’ll find a detailed explanation). The individual’s PIA is reduced by a factor based upon the number of months prior to Full Retirement Age that he or she has applied for benefits.
Knowing the individual’s PIA, the next factor in the calculation is the other spouse’s PIA, and the maximum amount of Spousal Benefit will be 50% of that PIA. This factor is available if the individual is at least Full Retirement Age. The reduction in overall benefits is the difference between 50% of the second spouse’s PIA and the first spouse’s PIA.
Example
Okay, this is confusing as all get-out without an example. Let’s say Dick and Jane are a married couple, with PIAs of $2,200 and $800 respectively. Dick and Jane are both age 66, Full Retirement Age. Jane started receiving her own retirement benefit at age 62, which is reduced to $600 since she started early. Dick intends to delay his retirement benefit to age 70 for the maximum benefit. Dick files and suspends his retirement benefit, which then allows Jane eligibility to file for the Spousal Benefit, while Dick’s benefit continues to accrue delayed retirement credits.
How much of a total benefit will Jane receive, under these circumstances? Here’s how it works: Jane’s PIA is subtracted from half of Dick’s PIA – $1,100 minus $800 = $300. This amount is the Spousal Benefit offset for Jane, which is added to her own benefit for her total benefit. Adding $300 to $600 equals $900. This is $200 less than 50% of Dick’s PIA (remember the pat answer from before?).
Another Example
Okay, what if there are a few changes to the above example: Dick is two years older than Jane – she’s 64 and he’s 66. He still files and suspends at age 66, his Full Retirement Age, and Jane then applies for the Spousal Benefit at her current age of 64.
Here is the way this calculation works (and some shorthand for the reductions):
- Determine Jane’s reduced monthly benefit ($600)
- Take Jane’s unreduced PIA and subtract it from half of Dick’s unreduced PIA ($1,100 minus $800 = $300). This amount is referred to as the Excess Spouse Benefit amount.
- If Jane is under Full Retirement Age (FRA), determine the number of months before FRA – in her case, it’s 24, as age 64 is 24 months before age 66.
- Multiply the Excess Spouse Benefit amount by the amount determined by subtracting her number of months prior to FRA from 144. ($300 times (144 minus 24) equals $36,000).
- Then divide that number by 144 ($36,000 divided by 144 equals $250). $250 is then added to her own retirement benefit amount to come up with the total benefit ($250 plus $600 equals $850).
Now, taking this one step further: If Jane is eligible for the Spousal Benefit more than 36 months before FRA (such as if Jane was 62 when Dick is 66), then the above calculations would be changed slightly:
- Determine Jane’s reduced monthly benefit ($600)
- Take Jane’s unreduced PIA and subtract it from half of Dick’s unreduced PIA ($1,100 minus $800 = $300). This amount is referred to as the Excess Spouse Benefit amount.
- If Jane is under Full Retirement Age (FRA), determine the number of months before FRA – in this case, it’s 48, as age 62 is 48 months before age 66.
- Multiply the Excess Spouse Benefit amount by the amount determined by subtracting her number of months greater than 36 prior to FRA from 180. ($300 times (180 minus 12) equals $50,400).
- Then divide that number by 240 ($50,400 divided by 240 equals $210). $210 is then added to her own retirement benefit amount to come up with the total benefit ($210 plus $600 equals $810).
It should be noted that if Jane had not filed for her own benefit before FRA and she waits until FRA to file for the Spousal Benefit, she will be eligible for a Spousal Benefit equal to 50% of Dick’s PIA – assuming that Dick has filed for his own benefit, or filed and suspended. Jane does not have to take her own benefit at this time, especially if her own benefit will potentially be greater than the Spousal Benefit.
Hope this helps to clear things up a bit. If not, please leave your questions in the comments section below and we’ll work together to come up with answers.
